GE FANUC IC693MDL733 12/24 Volt DC Negative Logic Output Module 0.5 Amp

GE FANUC IC693MDL733 , 12/24 Volt DC Negative Logic 0.5 Amp Output Module

Product Description

The GE Fanuc IC693MDL733 is a 12/24 volt DC Negative Logic 0.5 Amp Output module. Specifically engineered to work with the Series 90-30 Programmable Logic Controller, this module has 8 output points. These points are in a single group that share a common power output terminal. By design, this output module has negative logic characteristics. This means that the module sinks current from the loads to either the user common or else the negative power bus. As for output characteristics, this module can be used with an array of load devices, as supplied by the user. For example, the output module is compatible with indicators, motor starters and solenoids. The user must supply power in order to operate such field devices.

On the top of the module there is an LED block, which consists of two horizontal rows. Each row has eight green LEDs. One row is labelled A1 and the other B1. As this module only has eight output points, only A1 is used, with LED points 1 through 8 representing the ON/OFF status of output points 1 through 8 respectively. This module does not have any fuses. This is a low-voltage module, as indicated by the blue color coding on the edge of the insert between the inner and outer surface of the hinged door. When this door is closed, the surface on the inside (facing the inside of the module) has information on circuit wiring. On the outer surface, circuit identification information can be recorded. During applications with a Series 90-30 PLC system, users can install this output module in any I/O slot of a 5-slot or 10-slot baseplate.

About IC693MDL733

The GE Fanuc IC693MDL733 module is an I/O module. The IC693MDL733 module is a 12 to 24 Volts DC negative logic and 0.5 Amps rated output module for the GE Series 90-30 programmable logic controllers. The IC693MDL733 module provides 8 output points in one group with a common output terminal. The IC693MDL733 module is designed and manufactured by the GE Fanuc company. The Series 90-30 I/O modules can be controlled with either a Series 90-30 PLC or with a personal computer. A Series 90-30 PLC system consists of either a single baseplate with an embedded CPU (Model 311, 313, or 323), a CPU baseplate with 4 expansion and/or remote baseplates (model 331, 340, or 341) or a CPU baseplate with up to 7 expansion and/or remote baseplates (model 350, 351, 352, 360, 363, and 364).

The types of I/O modules available from GE Fanuc include discrete input modules, discrete output modules, discrete combination modules, analog input modules, analog output modules, and analog combination modules. The IC693MDL733 module is a discrete output module and it is designed to have negative logic characteristics and it sinks current from the load(s) to the negative power bus or to the user common bus. The rated voltage for the IC693MDL733 module is 12 to 24 Volts DC. The output voltage range is 12 to 24 Volts DC. There are 8 outputs per module. There is 1500 Volts of isolation between the field side and logic side. The maximum output current per point is 0.5 Amps. The module power consumption rating is 50 milliamps. The IC693MDL733 module requires 5 Volts DC of power from the backplane.

Technical Specifications

Technical Information

24 Volt DC Negative Logic Output Module

Negative Logic Output Module 0.5 Amp

GE FANUC IC693MDL733

GE FANUC IC693MDL733 12/24 Volt DC Negative Logic Output Module 0.5 Amp Images